Carecoat EWC

Home | Products & Categories | Carecoat EWC

Carecoat EWC - Caretaker

Carecoat EWC

Elastomeric Waterproofing Coating

CARECOAT-EWC is an acrylic based highly elastomeric waterproofing coating. After drying it forms a film of exceptional strength and flexibility that prevents peeling, fungi/algae growth, future cracks and water seepage.
CARECOAT-EWC bridges bigger cracks effectively and it is U.V. resistant

Product Benefits

Application

CARECOAT-EWC can be applied by airless spray, roller or brush coating can be diluted with water, after thinning with 20% water, apply 1st coat. Allow to dry for 5 hrs. (Preferably 24 hrs.) Apply 2nd coat after thinning with 20% water

Slopping Roofs

Reinforce CAREACOAT-EWC by incorporating a polyester mat (fibre mesh) of minimum Thickness of 45 gsm. as a part of sandwich membrane system. Lay this mesh on the 1ST wet coat before application of subsequent coats i.e. 1st prime coat of CARECOAT-EWC + Polyester Mat + 2 coats of CARECOAT-EWC

Direction for Usage

CARECOAT-EWC SEALER COAT (CARECOAT-EWC + water1:1) is must on masonry surface to ensure maximum penetration & adhesion to substrate.

CARECOAT-EWC.

Should not apply on new concrete & other surfaces less than 7 days old. Ideally concrete should be cured for 28 days before application. Before application, ensure that no under bond cement particles/cement remains on the surface. Allow surface to dry before application.

Existing Masonry

Reinforce CARECOAT-EWC by incorporating a polyester mat (fibre mesh)of minimum thickness of 45 gsm. as a part of sandwich membrane system. Lay this mesh on the 1st wet coat before application of subsequent coats i.e. 1st prime coat of CARECOAT-EWC + Polyester Mat + 2 coats of CARECOAT-EWC.

Nature One component, water thinable
Water dilution
20% by weight of clean potable water
Drying Time
Dry to touch 30 min.
Re-Coating
Min 5 Hrs
Elongation
Up to 200%
Coverage
Sealer coat 90-100 sq.ft lit.coat Finish coat 40-45 sq.ft.lit.coat (coverage may vary as per the Porosity of substrate)
No Of Coats
2-3 Coats or dependable upon the Substrate
Finish
Smooth & Matt
Scroll to Top